Mini CONVERTIBLE Owner'S Manual Download Page 231

Page: 231 / 324

Safety information

Warning

There is a danger of jamming with folding

down the rear seat backrests. There is a

risk of injury or risk of damage to prop-

erty. Make sure that the area of movement

of the rear seat backrest and the of the

head restraint is clear prior to folding

down.

Warning

If a rear seat backrest is not locked, unse-

cured cargo can be thrown about the car’s

interior; for

instance, in the event of an

accident, braking or an evasive maneuver.

There is a risk of injury. Make sure that

the rear seat backrest is locked after fold-

ing it back.

Warning

The stability of the child restraint system

is limited or compromised with incorrect

seat setting or improper installation of the

child seat. There is a risk of injury or dan-

ger to life. Make sure that the child re-

straint system fits securely against the

backrest. If possible, adjust the backrest

tilt for all affected backrests and correctly

adjust the seats. Make sure that seats and

backrests are securely engaged or locked.

If necessary, adjust the height of the head

restraints or remove them.

Warning

Body parts can be jammed when moving

the head restraint. There is a risk of injury.

Make sure that the area of movement is

clear when moving the head restraint.

Folding down the rear seat

backrest from the cargo area

Before the backrest is folded down, re-

move the respective seat belt from the

rear belt guide, refer to page

Pull the lever.

Fold the rear seat backrest forward.

Folding back the backrest

Fold up the backrest and press it into

the latch. Make sure that the seat belt is

not caught behind the backrest or in be-

tween the backrest and the rear seats.

Close the belt guide loop of the rear belt

guide, refer to page

Cargo area partition

Fold the convertible top upward as de-

scribed under Loading aid, refer to

page

230

Swing the cargo area partition upward

and pull backward out of the lower sup-

ports, arrows

Seite 231

Cargo area

CONTROLS

231

Online Edition for Part no. 01405A53AA0 - II/22

Summary of Contents for CONVERTIBLE





































































































































































































































































































































Search results

Summary of Contents for CONVERTIBLE

Reviews:

Related manuals for CONVERTIBLE

Brands by name

Popular brands

Mini CONVERTIBLE, Owner'S Manual

Search results

Summary of Contents for CONVERTIBLE

Reviews:

Related manuals for CONVERTIBLE

Brands by name

Popular brands