Page 6 of 50
AN-49-003 Rev.: E (September 6, 2019) M175867 (R95153) File: AN49003.doc
This document and its contents are the property of Mini-Circuits
1.5
Introduction
Figure 1:
SSG-15G-RC
1.6
Service and Calibration
The only user-performed service possible for the SSG models is external cleaning of the case and
connectors as needed. Do not use any detergents or spray cleaning solutions to clean the SSG unit. To
clean the connectors use an alcohol solution and to clean the SSG case a soft, damp cloth.
The recommended calibration cycle for Mini-Circuits SSG series Synthesized Signal Generators is once
every two years or every 4160 operating hours (See
on automatic tracking of operation time).
Calibration service is available from Mini-Circuits, for details; see the Ordering, Pricing & Availability
Information link from individual model pages on the website.
1.7
Contact Information
Mini-Circuits inc.
13 Neptune Ave
Brooklyn, NY 11235
Phone: 1-718-934-4500
General Fax: 1-718-332-4661
Sales / Customer Service Fax: 1-718-934-7092
For regional offices and tech support see
http://www.minicircuits.com/contact/offices.html
The Mini-Circuits SSG wideband synthesized signal generator series covers the frequency
range of 1 MHz to 15,000 MHz with up to 85dB dynamic range. All models feature a 50
Ω
RF
out, 10 MHz reference in and out connections and LVTTL trigger in and out ports, making
them a low cost replacement for conventional RF/Microwave signal generators. The provided
user-friendly software and USB cable connect the generator to a notebook or a PC with a USB
port, providing the additional benefits of frequency and power sweeps, pulse mode output,
GUI, easy interface with most lab test software, and much more. SSG models are powered by
supplied by an included AC/DC adapter.
