Minelab EQUINOX 700, Instruction Manual

Page: 22 / 61

22
CONTENTS
User Profile*
EQUINOX 900 has a User Profile button on the side of
the Control Pod that saves a copy of the current detector
settings for future quick access�
The User Profile provides you with an quick and easy way
to toggle between two sets of detecting settings — those
saved to the User Profile, and the last-used detector
settings�
The default settings for the User Profile are a copy of
Park Mode 1�
The User icon appears on the LCD when the User
Profile is turned On�
Any changes made to local settings when the User Profile
is active will be saved automatically�
SAVE A USER PROFILE
1.
Adjust the detector to the settings you want to save�
2. Make sure you are in the Detect Screen, not the
Settings Menu�
3. Press-and-hold the User Profile button until the User
Profile icon begins to flash�
(Flashing)
4. Release the button after the confirmation tone� The
User Profile icon will remain On�
Save over the User Profile at any time by repeating
the steps�
TURN THE USER PROFILE ON/OFF
Turn On
To turn the User Profile On, press the User Profile button�
Turn Off
To turn Off the User Profile, press either the User Profile
button or the Search Mode button� Settings will return to
the last-used Search Mode Profile�
OR
(Off) (Off)
* EQUINOX 900 only