PR 5500 Instrument Manual
Appendix
Sartorius EN-391
13.5 Terminal Coding
The combinatorics defined during the order process are used to encode the corresponding connectors before
their delivery. The connectors only need to be encoded subsequently if plug-in cards are supplied after the
original delivery.
The coding position for the individual cards is described in Chapter 4.4.
Procedure
1
2
t
t
Remove terminal (6) from terminal block (4).
t
t
Disconnect coding pin (1) from coding profile (2).
3
4
t
t
Insert coding pin (1) into the corresponding
slot (3) of terminal block (4).
5
6
t
t
Remove (pinch off) coding ridge (5) on
terminal (6).
t
t
Re-insert terminal (6) into terminal block (4).
Summary of Contents for Sartorius Intec Maxxis 4 PR 5500
Page 406: ......