manualshive.com logo in svg

Minebea Sartorius Intec Maxxis 4 PR 5500, Instrument Manual, Page: 328 / 407

Share
Download
Minebea Sartorius Intec Maxxis 4 PR 5500 Instrument Manual Download Page 328

Extended Functions 

PR 5500 Instrument Manual

EN-318 Sartorius

t

y

If no SD card is inserted or the SD card is not 
detected, a prompt window will appear.

t

t

Press the [Cancel] soft key to avoid data loss.

t

t

Insert the SD card and confirm the line [Shutdown 
& Power off].

t

y

A prompt window appears.

t

t

Press the [Continue] soft key.

t

t

Disconnect the power plug.

6.1.10  Updating the Software

6.1.10.1  General Information

This function is required to install up-to-date software on the device.
The following options are available:
There are two ways to update the software:

 

-

via soft key (one click software update)

 

-

via menu

6.1.10.2  One Click Software Update

This function can be used if new software versions from a department are provided on the company‘s central 
network and these should be easily installed by an authorized operator.
To execute the software update via soft key, the following requirements must be met:

 

-

Network share connection ‚ONECLICKUPDATE‘ is created under  
[System setup] - [Network share connections].

 

-

The files, if they exist, must have the following names:

 

-

pr5500-r01-bios.bin

 

-

pr5500-r01-firm.bin

 

-

pr5500-appl.bin

 

-

pr5500-labl.bin (optional)

 

-

The parameter [W&M] must be set to ‚none‘.

 

-

The parameter ‚Settings locked‘ is deactivated.

 

-

The CAL switches are open.

Summary of Contents for Sartorius Intec Maxxis 4 PR 5500
























































































































































































































































































































































































































Reviews:

No comments