Minebea Sartorius Intec Maxxis 4 PR 5500, Instrument Manual, Page: 197 / 407

PR 5500 Instrument Manual Commissioning
Sartorius EN-187
[Weighing parameters]
— Ambient conditions — Tare parameters — Power-on zero range
— very stable condition — At any time — Factory settings
— Stable condition — Not until stable — 2 % of max. load
— Unstable condition — 5 % of max. load
— Very unstable condition — Auto zero function — 10 % of max. load
— On — 20 % of max. load
— Application/filter — Off
— Standard mode — Power-on tare/zero
— manual filling — Adjustment function — Active
— automatic dosing — Ext.adj.w.fact.wt. — Inactive
— Check weighing — Ext.adj.w.user wt. — Only for zeroing
— Ext.adj.w.pres.wt.
— Standstill range — Internal adjust — Measuring rate
— 0.25 digit — Ext.lin.w.fact.wt. — Normal output
— 0.5 digit — Ext.lin.w.user wt. — Fast output
— 1 digits — Confirm preload/dead load
— 2 digits — Delete preload/dead load — Calibration check
— 4 digits — Adjust disabled — No calibration prompt
— 8 digits — Calibration prompt
— Confirming adjustment
— Stability symbol delay — automatically — External Adjustment
— No delay — manual — enabled
— Short delay — disabled
— Average delay — Zero range
— Long delay — 1 % of max. load — Application Tare
— 2 % of max. load — enabled
— 5 % of max. load — disabled
— 10 % of max. load
— Maximum capacity
— Reduced by pre-/dead load
— Constant
t t
Press the [Save] soft key to save the settings.