manualshive.com logo in svg

Minebea Sartorius Intec Maxxis 4 PR 5500, Instrument Manual, Page: 129 / 407

Share
Download
Minebea Sartorius Intec Maxxis 4 PR 5500 Instrument Manual Download Page 129

PR 5500 Instrument Manual 

Commissioning

Sartorius EN-119

5.6.4  Operation using the VNC Client Program

VNC (on the enclosed CD) stands for “Virtual Network Computing” and is a program for the remote operation of 
computers.
The program distinguishes between the VNC server and VNC client (viewer). The server program is part of the 
device software.The client program (viewer) must be run on the notebook/PC in order to operate the device.

Note

The VNC version provided on CD must be used.
More recent VNC versions (freeware) from the internet are not supported by the device.

For direct operation using the VNC program, the 
IP address (extended by :1) must be specified when 
you run the program,  
e.g., 172.24.20.57:1.

VNC access can be limited to specific notebooks/PCs in 
the network; see Chapter 5.19.4.
The VNC user interface appears.

Summary of Contents for Sartorius Intec Maxxis 4 PR 5500
























































































































































































































































































































































































































Reviews:

No comments