Safety Information
PR 5500 Instrument Manual
EN-2 Sartorius
2 Safety Information
2.1 Electrical Protective Class
Warning!
This instrument has been built and tested in compliance with the safety regulations
for measuring and control instrumentation for protective class I (protective grounding
conductor) according to IEC 1010/EN 61010 or VDE 0411. The instrument was in
perfect condition with regard to safety features when it left the factory. To maintain
this condition and to ensure safe operation, the operator must follow the instructions
and observe the warnings in this manual.
!
Warnung
2.2 Intended Use
This instrument is only intended for use in weighing and metering systems, and is especially well-suited for tank
and container scales, weigh bridges, platform weighers, crane weighers, dispensing systems and as a weighing
indicator in intelligent control systems. Product operation, commissioning and maintenance must be performed
by trained and qualified personnel who are aware of and able to deal with the related hazards and take suitable
measures for self-protection.
The instrument reflects the state of the art. No warranty is given that the product is free of faults, especially not
in conjunction with third-party software and hardware components required for operation.
The manufacturer does not accept any liability for damage caused by other system components or due to
incorrect use of the product. The use of this product signifies recognition of the stipulations listed above.
2.3 Initial Inspection
Check the contents of the consignment for completeness. Check the contents visually to determine whether any
damage has occurred during transport. If there are grounds for rejection of the goods, a claim must be filed with
the carrier immediately. The Sartorius Intec sales or service organization must also be notified.
Summary of Contents for Sartorius Intec Maxxis 4 PR 5500
Page 406: ......