Minebea Intec Puro LargeCount EF-LT P1, Operating Instructions Manual

Page: 52 / 80

— ON activated
— SERNO Serial number of the active (displayed) scale
Example: W1 38457989 or W2 38457989
— OFF deactivated*
— ON activated
— LI.SET Totalizing memory
— FORMAT Format sent to printer and PC
— MULTI Multi-line (single-column) printout*
— SINGLE Single-line printout; the entire content defined
above is printed in one line
— FEED Setting of the paper feed
— LINE One-line feed
— 4LF Four-line feed*
— FORM Page feed after printing
— END
— PROD.LI Print entire product memory
— NO deactivated*
— YES Print all products
This happens at the time when Yes is selected.
Then all products are printed. Afterwards No is
specified automatically.
— RESET Factory settings
— NO not reset*
— YES activated
— END Exit menu level
— BAUD Baud rate
— 2400 2,400
— 4800 4,800
— 9600 9,600*
— 19200 19,200
— 38400 38,400
— 57600 57,600
— 115200 115,200
— PARITY Parity
— 7 EVEN 7 data bits, even parity
— 7 Odd 7 data bits, odd parity
— 7 NONE 7 data bits, no parity
— 8 NONE 8 data bits, no parity*
— STOP Stop bit
— 1 1*
— 2 2
— RESET Factory settings
— NO not reset*
— YES activated
In this case "without stability" means weight values with or without stability.
In this case "with stability" means only weight values with stability.
5.3.4.5 [PRN.COM] menu selection
The parameters for the print communication can be specified in this menu.
Factory settings are marked with "*"
PRN.COM
Compact scale Puro® LargeCount 5 Operating
EN-50 Minebea Intec