3
Device description
3.1
Transmitter versions
3.1.1
General information
The transmitter of the PR 5211 series exists in 3 versions. A later extension of the version
is not possible. Each type is clearly fixed by the corresponding number. The front overlays
are adapted to the corresponding type.
PR 5211/00
PR 5211/10
PR 5211/11
3.1.2
PR 5211/00
This is the fully equipped version. It has digital inputs and outputs as well as an analog
output and a USB-B port for configuring the device.
The serial output can be used to connect, e. g. a remote display.
This version has a Profibus connection as well.
3.1.3
PR 5211/10 (without ProfiBus-DP)
This version has digital inputs and outputs as well as an analog output and a USB-B port
for configuring the device. The serial output can be used to connect, e. g. a remote
display.
This version does not have a Profibus connection. The respective menus in the operating
tools have been adapted to this version.
3.1.4
PR 5211/11 (without analog output)
This version has digital inputs and outputs as well as a USB-B port for configuring the
device. This serial output can be used to connect, e. g. a remote display.
This version has a Profibus connection, but no analog output. The respective menus in the
operating tools have been adapted to this version.
Transmitter Series PR 5211
3 Device description
Minebea Intec
EN-10
Summary of Contents for PR 5211 Series
Page 95: ......