Minebea Intec PR 5110, Instrument Manual

Page: 7 / 36

2 Safety instructions
2.1 General notes
CAUTION
Warning of personal injury.
The product was in perfect condition with regard to safety features when it left the
factory.
To maintain this condition and to ensure safe operation, the user must follow the
instructions and observe the warnings in this manual.
2.2 Intended use
The remote display is intended for the display of the weight values of a scale and the
limited operation of a device. The unit is approved for operation in legal-for-trade
applications.
The remote displays PR 5110/60, ../70 are suitable for use in zones 1 (PR 5110/60, ../70)
and 21 (only PR 5110/70). The instruments are itted with an intrinsically safe serial
interface.
Product operation, commissioning and maintenance must be performed by trained and
qualiied personnel who are aware of and able to deal with the related hazards and take
suitable measures for self-protection.
The device relects the state of the art.
No warranty is given that the product is free of faults, especially not in conjunction with
third-party software and hardware components required for operation.
The manufacturer does not accept any liability for damage caused by third-party system
components or due to incorrect use of the product. The use of this product signiies
recognition of the stipulations listed above.
2.3 Initial inspection
Check the contents of the consignment for completeness. Check the contents visually to
determine whether any damage has occurred during transport. If there are grounds for
rejection of the goods, a claim must be iled with the carrier immediately. The
Minebea Intec sales or service organization must also be notiied.
2.4 Before operational startup
NOTICE
Perform visual inspection.
Before operational startup as well as after storage or transport, inspect the device
visually for signs of mechanical damage.
Before operational startup, acceptance of the installation by an authorized expert is
compulsory.
2 Safety instructions Remote display PR 5110/60, ../70
EN-5 Minebea Intec