Minebea Intec Maxxis 5 Phase PR 5900/81, Operating Instructions Manual

Page: 66 / 94

WP-A WP-A Max 3000g d= 0.1g
1 0 0 1
N N
+ +
gg
180g 200g 220g
Scale-A
Production line
Recipe
Setpoint
Difference
Manual Fill manually D2
PL 1
Manual whit LOT
200.0 g
-0.1 g
Stop LOT no. Done Recipe
7.3.11 Release for Taring
Automatic taring of the manual dosing does not have to be carried out straight away;
instead, the taring can be triggered by the operator.
In PR 8400 (P), the input to trigger the taring process is entered in the
[Parameter] ield under [Component] - [Edit] /[Create], e.g. "SPMinTare=16".
Configuration @admin
Inputs
Outputs
Modbus-TCP master
Limits
Parameters
Production lines
Local control
Overview weighing points
View weighing point
Simulation
Print
The "SPMinTare=16" input can then, for example, be set to a free digital input on the
device under [Coniguration] - [Inputs] .
Continue with the batching process.
8. If the target value has been reached, press the [Done] soft key.
The second batched quantity is sent to PR 8400 (P) with all relevant
data.
Phase PR 5900/81 7 Operation and visualization of the scales
EN-64 Minebea Intec