Minebea Intec Maxxis 5 Phase PR 5900/81, Operating Instructions Manual

Page: 63 / 94

7.3.9 Preceding Dialog
In PR 8400 (P), dialog type dialog=X and the other parameters labeled with
[dsp] are entered under [Component] - [Edit] /[Create] in the [Parameter] ield.
There are nine types of dialog the user can choose.
Dialogtyp Dialog function
dialog=1 Enters a number (INT); "dsp1" acts as a headline, "dsp2" as a possible
unit.
dialog=2 Enters a number (REAL); "dsp1" acts as a headline, "dsp2" as a possible
unit.
dialog=3 Enters a weight value; "dsp1" acts as a headline; unit for the weight is
transferred from the device.
dialog=4 Enters a text (STRING); "dsp1" acts as a headline.
dialog=5 Dialog with [Ok] soft key; "dsp1" acts as a headline.
dialog=6 Dialog with [Ok] and [Cancel] soft key; "dsp1" acts as a headline.
dialog=7 Dialog with [Yes] and [No] soft key; "dsp1" acts as a headline.
dialog=8 Dialog with [Yes], [No] or [Continue] soft key; "dsp1" acts as a head-
line.
dialog=9 Dialog with up to three user-deined soft keys; "dsp1" acts as a head-
line.
Entering the soft keys is done using dsp2.
Example: dsp2="key1 key2 key3"
Example:
Hand component D4_Dialog, dialog type: dialog=1
[dsp1=] deined headline
[dsp2=] deined unit
The value to be entered is stored in loating point format.
. Enter the LOT no. using the keyboard and conirm.
The LOT number is saved in PR 8400 (P), the input window is closed,
and the phase starts taring.
7 Operation and visualization of the scales Phase PR 5900/81
Minebea Intec EN-61