Minebea Intec Maxxis 5 Phase PR 5900/81, Operating Instructions Manual

Page: 59 / 94

1 1
2 2
3 3
Production line
Recipe
Customer
Order
Production ID
Recipe cycles
PL 1
Single 1
Schmidt KG
2013-07-03-005
5
1
Start Load
7.3.5 Weighing Point View
The weight display appears if:
- the selected weighing point is conirmed in the overview;
- the "Overview weighing points" menu item was deactivated under [Coniguration] -
[Overview weighing points] .
WP-A WP-A Max 3000g d= 0.1g
0 0
gg
0g 3000g
Scale-A Free
Recipe
The metrological line, bar graph, status and current weight for the selected weighing
point are displayed.
If no phase is active on the weighing point, it has "free" status.
3. Press the [Load] soft key to load the available recipes/plans of the activated
production line into the device.
4. Using the keyboard, enter and conirm the values on the next few lines (if [Local
control] was selected under [Coniguration]).
5. Press the [Start] soft key.
7 Operation and visualization of the scales Phase PR 5900/81
Minebea Intec EN-57