Minebea Intec Maxxis 5 Phase PR 5900/81, Operating Instructions Manual

Page: 50 / 94

5.5 Switching of the device
This function is required to disconnect the device from the power immediately, e.g., to
install an option card. The rechargeable battery is immediately deactivated.
Note:
With a menu-driven shutdown, not all the content of the SD-RAM will be saved to a
NAND lash memory.
When restarting, a cold start is forced. For example, database entries
no longer exist.
It is recommended to irst make a backup on the SD card and/or export the data to a
USB stick; see Chapter PR 5900 operating instructions.
System maintenance @admin
Backup
Restore
Export
Import
Alibi memory maintenance
SD card maintenance
Create service report
Shutdown & Power off
Update software
Factory reset
Test hardware
Shutdown & Power off @admin
? ?
WARNING!
After pressing 'Continue', the device must be
disconnected from the power supply.
Cancel Continue
1. In the operating menu, select and conirm [System maintenance] - [Shutdown &
Power of].
A prompt window opens.
2. Press the [Next] soft key.
3. Disconnect the power plug.
Phase PR 5900/81 5 Getting started
EN-48 Minebea Intec