Minebea Intec Maxxis 5 Phase PR 5900/81, Operating Instructions Manual

Page: 42 / 94

Set limit values according to example 1
Limits @admin
1 1
2 2
3 3
Scale
Limit 1 on
Limit 1 off
Limit 2 on
Limit 2 off
Weighing point A
890.0 g
900.0 g
300.0 g
290.0 g
Default Save
5.4.6 Parameters
The parameters valid for all applications are conigured in this menu item.
Configuration @admin
Inputs
Outputs
Modbus-TCP master
Limits
Parameters
Production lines
Local control
Overview weighing points
View weighing point
Simulation
Print
Parameters @admin
Printer for configuration
Dialog manual phase
LOT input field
ID input field
Printer
Start Dosing
numeric
Text
Default Save
4. Using the cursor, select appropriate lines.
5. Use the keyboard to enter and conirm the desired values (in this case: see
example 1).
6. Press the [Default] soft key to return to the factory settings, if required.
7. Finally, press the [Save] soft key to save the settings.
1. Use the cursor to select and conirm [Parameters].
A selection window opens.
Phase PR 5900/81 5 Getting started
EN-40 Minebea Intec