Minebea Intec Maxxis 5 Phase PR 5900/81, Operating Instructions Manual

Page: 33 / 94

5.4.3.1 Analog output
The weight value of the selected weighing point is transmitted to the output.
Outputs @admin
Option
Type
Option-1
no output
Outputs @admin
Option
Type
id="PHASE_Option_1" 1 Zeile end
no output
Option-1
Option-2
Built-in
Outputs @admin
Option
Type
Data source
Analog value
Range
On ADC error
On < zero
On > max
Option-2
Analog output
Weighing point A
Gross
4...20 mA
0 mA
0 mA
20 mA
Default Save
1. Select and conirm [Option] using the cursor.
A selection window opens.
2. Select and conirm the corresponding interface using the cursor.
The factory settings are displayed.
3. Conigure the analog output in accordance with the table below.
4. Press the [Default] soft key to return to the factory settings, if required.
5. Press the [Save] soft key to save the settings.
5 Getting started Phase PR 5900/81
Minebea Intec EN-31