— MODE
PC Output Mode
— INTERV
Set the output interval (when [INT.OUT] is
selected in MODE)
— RESET
Set menu point [PC.OUT] to factory defaults
— END
Leave menu level
11 PC-OUT
This is an additional interface based on USB-C standard.
11.1
Output Format
This output format is the response to the interface commands which requests a weighing
value like "ESCP".
Also this format is used for automatically generated telegrams which are generated
regarded the menu settings: [INT.OUT] , [AUT.OUT] , [AUT.STA] please look above.
This format is specified in the SBI-Specification by Uwe Anlauf.
Output (16 characters):
V
W
W
W
W
W
W
W
W
W
E
E
E
CR
LF
V:
Sign (possible characters: "+", "–", " ")
W:
Weight Value (possible characters: "0" … "9", ".", " ")
E:
Unit (possible characters: "a" … "z", "A" … "Z", " ")
CR:
Carriage Return (ASCII 0x0D)
LF:
Line Feed (ASCII 0x0A)
Possible Commands are:
P
Read displayed value
Z
Zero the weighing platform
T
Tare the weighing platform
11.2 Menu settings PC-OUT
Menu point [PC.OUT] has the following submenus:
PC.OUT
The PC-Output Mode
is to be configured in menu point [PC.OUT] - [MODE] (see
Chapter
The PC-Output Interval
is to be configured in menu point [PC.OUT] - [INTERV] (see
Chapter
11 PC-OUT
Compact Scale Puro® Count
Minebea Intec
EN-71
