Minebea Intec EF-LT-3-P1, Operating Instructions Manual

Page: 57 / 86

— MAX Max.-Load
— END
— LFT.MOD Show state of the legal for trade mode: ON or
OFF for
both scales
— OFF standard mode
— ON Legal for trade mode is activated
— LOCK.SW Show state of the lock switch for both scales
— OPEN switch is open
— CLOSED switch is closed
— END Leave menu level
— S.METRO Metrology Menu
— OFF menu item is changeable*
— ON lock menu item
— S.UNIT Unit Menu
— OFF menu item is changeable*
— ON lock menu item
— S.OP.FUN Operation Function Menu
— OFF menu item is changeable*
— ON lock menu item
— S.PRINT Print Menu
— OFF menu item is changeable*
— ON lock menu item
— S.PR.COM Printer Communication Menu
— OFF menu item is changeable*
— ON lock menu item
— S.PC.OUT PC Output Menu
— OFF menu item is changeable*
— ON lock menu item
— S.PC.COM PC Communication Menu
— OFF menu item is changeable*
— ON lock menu item
— S.CAL.AD Calibration Menu
— OFF menu item is changeable*
— ON lock menu item
— S.ADC.CO ADC Menu
— OFF menu item is changeable*
— ON lock menu item
— RESET Restore factory setting of current menu
— OFF menu item is changeable*
— ON lock menu item
— END Leave menu level
7.4.11 Menu Selection [SECURE]
Enter this menu to define Security setting (Lock) on menu option to prevent tampering.
Default settings are identified by an "*"
SECURE
7 Menu Settings Compact Scale Puro® Count
Minebea Intec EN-55