12 System setting (SYSTEM)
The backlight lighting time, the data stored place, the data comparison and memory clear
related to the operations are set.
12.1 Switch to the screen for system setting
The procedures to switch screen from weighing screen to system setting screen shows as
follows.
Note:
-
Memory clear means return to the default.
-
Clear memory does not change locked calibration entries when overwrite protection
is active.
12.2 Time for backlight of (BACK-LIGHT OFF TIMER)
The time until the back light is turned of when there is no operation is set. The time is
input with ten keys in the range from 1 minute to 60 minutes.
The backlight keeps lightening when [0] minutes is set.
12.3 Memory clear
12.3.1
Memory clear related to the comparative setting (COMPARATOR MEMORY CLR.)
The memory for the setting of brand is cleared.
12.3.2
Memory clear related to the operational setting (OPERATION MEMORY CLR.)
The memory for the setting of basic function, I/O, weighing operation, sequence control,
standard communication and optional parts is cleared.
1. Select [MENU].
2. Tap [NEXT] in the menu screen 1/2.
3. Select [SYSTEM] in the menu screen 2/2.
12 System setting (SYSTEM)
Weight Controller CSD-918
Minebea Intec
EN-127
Summary of Contents for CSD-918 Series
Page 239: ......
