Minebea Intec CAS1, Operating Instructions Manual, Page: 71 / 160

— COM-1 Settings for the RS-232 interface
— DAT.PROT Data protocols
— XBPI.232 xBPI-232 protocol (RS232-Mode)
— COM-1
— DAT.PROT Datenprotokolle
— MP8 Protokoll für Waagen der MP8-Generation
(80ger Jahre)
— COM-1 Settings for the RS-232 interface
— DAT.PROT Data protocols
— SMA SMA protocol
— CONFIG. 5 - Coniguration
— BAUD 5.1 - Baud rate
— 150 5.1.1 - 150
— 300 5.1.2 - 300
— 600 5.1.3 - 600
— 1200 5.1.4 - 1200*
— 2400 5.1.5 - 2400
— 4800 5.1.6 - 4800
— 9600 5.1.7 - 9600
— 19200 5.1.8 - 19200
— … … more menus as under SBI (see
chapter 6.3.2.1.1 )
— COM-1 Settings for the RS-232 interface
— PRINTER Printer coniguration
— YDP20 YDP20 printer (see chapter 6.3.2.2.1 )
— YDP14IS YDP14IS printer
— LINE Strip printer
— LABEL Label printer*
— UNI-PRI Universal printer (see chapter 6.3.2.2.2 )
— YDP04/5 YDP04/5 printer
— LINE Strip printer
— LABEL Label printer*
— LAB FF Label printer with manual feed
* Factory setting
6.3.2.1.2 XBPI.232
SETUP
6.3.2.1.3 MP8
SETUP
6.3.2.1.4 SMA
SETUP
SMA
* Factory setting
6.3.2.2 PRINTER
SETUP
PRINTER
6 Menu structure Combics 1 Series Complete Scales Models CAW1P, CAW1S, CAS1
Minebea Intec EN-69