CAUTION
Property damage and/or personal injury are possible.
The power connection must be made in accordance with the regulations applicable
in your country.
Make sure that the voltage rating printed on the manufacturer's ID label is identical to
that of your local line voltage. If the voltage speciied on the label or the plug design of
the AC adapter do not match the rating or standard you use, please contact your Minebea
Intec oice or dealer.
Protection Class 1 Device
Schutzmaßnahmen
CAUTION
Property damage and/or personal injury are possible.
If you use an electrical outlet that does not have a protective grounding conductor,
ensure that an equivalent protective conductor is installed by a certiied electrician
(as speciied in the applicable regulations for installation in your country).
The protective efect must not be negated by using an extension cord without a
protective grounding conductor.
Before using for the irst time, any superstructure parts must be completely installed.
Avoid connecting the equipment to lines that have a heavy electrical load, e.g.
compressors, large machinery, etc.
4.2.11
Operating limits
You should not exceed the highest load for weighing platforms. The highest capacity for
the weighing platform is as follows depending on the load used (center, side, one-sided
corner load):
.
Check the voltage rating and plug design.
.
The device must be plugged into a properly installed wall outlet.
.
The device must be plugged into a properly installed wall outlet which has a
protective grounding conductor (PE).
Combics 1 Series Complete Scales Models CAW1P, CAW1S, CAS1
4 Device installation
EN-38
Minebea Intec