manualshive.com logo in svg

Mine Site Technologies MP70 MinePhone, Administrator'S Manual, Page: 48 / 72

Share
Download
Mine Site Technologies MP70 MinePhone Administrator'S Manual Download Page 48

# network.ntp.enabled=true
# network.ntp.ip.address=172.16.3.5

# network.rtp.port=9090
# network.rtp.packetizetime=20ms
# network.rtp.codec=g.711a

Values

Description

Field

Usually the phone extension.

User name as it appears to other users.

sip.register.name

password

Password to authenticate user to the SIP
server.

sip.register.password

Usually the phone extension.

Username for authenticating to the SIP
server.

sip.register.auth

Hostname or IP address.

SIP server hostname or IP address.

sip.register.domain

By default port number is 5060.

Port number to access the SIP server.

sip.register.port

True or False. By default TFTP
is True.

Whether TFTP configuration download is
enabled.

network.tftp.enabled

Hostname or IP address.

TFTP server name or IP address.

network.tftp.ip.address

True or False. By default NTP
is True.

Whether NTP time synchonisation is enabled.

network.ntp.enabled

Hostname or IP address.

NTP server name or IP address.

network.ntp.ip.address

Default port number is 9090.

RTP Port setting of up to 5 digits.

network.rtp.port

10ms or 20ms. Default value is
20ms.

Sets the RTP packetization interval.

network.rtp.packetizetime

g.711a, g.711mu, g.729a.
Default setting is g.711a

Codec setting.

network.rtp.codec

AP Roam Tuning

The AP Roam Tuning section can fine tune the phone's ability to connect to a new access point. Settings
should not changed without understanding the implications. Settings and description are shown in the
screenshot and table below.

#-- AP Roam Tuning -------------------------------------------------
# These settings are used to fine tune the decision making for 
# when to switch to a new AP.  They should only be changed by 
# expert administrators.
#-------------------------------------------------------------------

# roamscan.roam.threshold=-80
# roamscan.roam.floor=15
# roamscan.aggressive=false

# roamscan.scan.threshold=-70
# roamscan.scan.period=3
# roamscan.scan.foreground.start=1
# roamscan.scan.foreground.end=16
# roamscan.scan.background.period=60
# roamscan.scan.dwell.active.min=5
# roamscan.scan.dwell.active.max=30

Revision A

48

MP70 MinePhone Administrator Guide

Trivial File Transfer Protocol (TFTP) Configuration

Summary of Contents for MP70 MinePhone









































































Reviews:

No comments