Mindray VS 8A, Operator'S Manual

Page: 190 / 278

18 - 20
18.16.5 The Transfer Setup Tab
Obtain DNS address
automatically On Selects whether to enable the function of
automatically getting the DNS address.
Using the Following
DNS Address Off Selects whether inputting the IP address of
Preferred DNS Server and Alternate DNS
Server is required.
Menu Item Default Setting Function
Menu Item Default Setting Function
/ Send Data Central Station Selects a destination to send selected
data.
Central
Station
Setup Select CMS On Selects whether to enable the CMS
selection function for your monitor.
Add Central
Station / Inputs the name, department, and
server address of the CMS. You can
add up to 30 CMSs for monitor.
eGate
way
Setup Server Address / Input the server address or IP address
of eGateway.
IP Address 0.0.0.0
Network Test / Tests whether the eGateway server is
properly connected.
Data +
Wavef
orms Server Address / Inputs the name or IP address for the
server receiving the realtime data and
waveform.
Destination IP 0.0.0.0
Port 0 /
Send Data Off
Send
Waveforms Off
Data Interval 30 sec
Connection
Status Disconnected