Mindray TE5, Operator'S Manual

Page: 98 / 323

5-36 Image Optimization
5.10 Color M Mode
Color M mode provides information of color flow or tissue movement on the M mode images to
indicate cardiac motion state. It is highly sensitive to the flow or tissue movement.
The Color M mode includes Color Flow M mode and Color Tissue M mode (also known as TVM).
5.10.1 Enter Color M Mode
 Color Flow M mode

In B+M Mode, tap [Color].
 In B+Color, B+ Color+ PW or B+ Color+ CW mode, tap [M].
 Color Tissue M mode(TVM)

In B+TVI/TVD, or B+TVI+TVD mode, tap [M].

In Color Flow M mode, tap [TDI] on the right side of the operating panel.
5.10.2 Exit Color M Mode
 Tap [Color] or [M] to exit Color M mode.
 Or, tap [B] to return to B mode directly.
5.10.3 Image Parameters
 In Color Flow M mode, parameters that can be adjusted are in accordance with those in B, M
and Color modes; please refer to relevant sections of B, Color and M mode for details.
 In Color Tissue M mode, parameters that can be adjusted are in accordance with those in B,
M and TVI modes; please refer to relevant sections of B, Color and TVI modes for details.
 In Color M mode scanning, the image parameter area in the top-left part of the screen will
display the real-time parameter values.
 ROI Adjustment
The ROI size and position determine the size and position of the color flow or color tissue
displayed in the Color M mode image.
 Tap the corner (green dot) of the ROI and drag to change the ROI size.

Tap inside the ROI box and drag to change the ROI position.
 Tap mode tabs in the image menu to switch between current activated modes. For example,
tap [Color] in the image menu to activate Color ROI adjusting status.