12-20 Setup
12.11 Security
Click [Security] on the Setup menu to enter the security-setting screen.
1. Drive Encryption/Secure Data Wipe
Encrypt the patient data stored in the hard disk. The system provides two encryption methods: Factory
Default and User Define.
Factory Default: the system is in factory state by default.
User Define: add a user-defined password.
1) Select [User Define]. If the patient data are already stored in the hard disk, the system prompts the
following message: (if no patient data are stored in the hard disk, perform steps 5 to 6 directly)
2) Click [OK] to return to the Security screen, click [Wipe], and the system prompts the following
message:
3) Click [OK], and the system prompts the following message:
