Setup 12-1
12
Setup
The Setup function is designed to set the configuration parameters of operating the system and
maintaining user workflow setup data. The setup data of the user and system are stored to the hard drive,
and should be backed up to CD/DVD or USB memory device.
CAUTION:
When the preset data is changed, be sure to save the preset data according
to the methods described in this chapter. Mindray is not responsible for the
loss of preset data.
To enter Setup:
Press <F10 Setup> on the keyboard to enter the setup menu.
To exit Setup:
Select [Save] in the Setup menu. The parameter settings are saved.
Select [Cancel] in the Setup menu or press <ESC> to close the Setup menu.
When you change the system language and click [OK] in the Setup menu, the system automatically
shuts down to make the modification effective.
Basic operations
The commonly-used setting types are:
Text box: position the cursor over the corresponding field box. Enter the desired value using the
keyboard or soft keyboard on the soft menu.
Radio button: click the button to select an item.
Check box: click the checkbox to select one or more options.
Drop-down list: click the arrow beside the list to select an item.
