Mindray DC-25 Page 13 Service Manual Download

Page: 13 / 213

Preface 1-1

Preface

This chapter describes important issues related to safety precautions, as well as the
labels and icons on the ultrasound machine.

1.1

Meaning of Signal Words

In this operator’s manual, the signal words

DANGER

WARNING

CAUTION

and

NOTE

are used regarding safety and other important instructions. The signal words and their

meanings are defined as follows.

Please understand their meanings clearly before reading this

manual.

Signal word

Meaning

DANGER

Indicates death or serious injury may occur imminently in this
hazardous situation if not avoided.

WARNING

Indicates death or serious injury may occur potentially in this
hazardous situation if not avoided.

CAUTION

Indicates minor or moderate injury may occur potentially in this
hazardous situation if not avoided.

NOTE

Indicates property damage may occur potentially in this hazardous
situation if not avoided.

Summary of Contents for DC-25






















































































































































































































Search results

Summary of Contents for DC-25

Reviews:

Related manuals for DC-25

Brands by name

Popular brands

Mindray DC-25, Service Manual

Search results

Summary of Contents for DC-25

Reviews:

Related manuals for DC-25

Brands by name

Popular brands