Mindray DC-25 Page 129 Service Manual Download

Page: 129 / 213

Structure and Assembly/Disassembly

7-29

Fig 7-13 Disassemble the main unit fan assembly

4. Remove the fixing M4X8 flat head screws (2 pcs); cut the fan cable ties to remove

the fan.

Fig 7-14 Disassemble the main unit fan

7.4.4

Power Input Assembly

1. Remove the IO board assembly and the rear cover(refer to Chapter 1.3.2 and 1.3.3)

2. Remove the screws M4 X 8 (3pcs) of power input assembly and remove the screw

M4X8 (2pcs) for fixing the grounding cable terminal. Unplug the cable to take down
the assembly upwards.

NOTE:

During installation, pay attention to the main unit fan label, which should

be facing outwards.

Summary of Contents for DC-25






















































































































































































































Search results

Summary of Contents for DC-25

Reviews:

Related manuals for DC-25

Brands by name

Popular brands

Mindray DC-25, Service Manual

Search results

Summary of Contents for DC-25

Reviews:

Related manuals for DC-25

Brands by name

Popular brands