Components
Theory of Operation
1 - 6
14. Auxiliary Gas Outlet Assembly
The Auxiliary Gas Outlet Assembly provides the patient with auxiliary oxygen and air mixtures
(of different concentrations). It also contains an O
2
connection for use with other equipment.
15. Breathing System Interface
The Breathing System Interface provides a connection interface for gas signal acquisition
between the Breathing System and gas circuit.
16. Breathing System Pneumatic Hose
The Breathing System Pneumatic Hose provides multiple connections including: PEEP control,
Auto/Manual control, and four pressure sampling connections between the Breathing System
and mainframe.
17. O
2
Sensor Cable
The O
2
Sensor Cable provides a connection between the oxygen sensor component in the Breathing
System and the oxygen concentration signal acquisition port on outlet module of the mainframe.
18. Breathing System Interface
The Breathing System Interface provides the main unit with an interface for connection with
drive gas, heating system and the oxygen concentration sensor of the Breathing System.
19. The Breathing System Support Arm
The Breathing System Support Arm provides connection between the Breathing System and
the mainframe, in order to support the Breathing System.
20. Heater Wire
The Heater Wire provides connection to the heating system of the Breathing System. By
heating the Breathing System during anesthesia, accumulation of water in the Breathing
System is minimized. It also provides comfortable gas to the patient.
21. AGSS Transfer Hose
The AGSS Transfer Hose provides pipeline connection between the exhaust gas outlet of the
Breathing System and the AGSS evacuation system.
22. Lower Mainframe Assembly
The Lower Mainframe Assembly provides support for the drawer subassembly, outlet module,
CGO subassembly, O
2
flush valve and the electric box. Together with the Upper Mainframe
Subassembly and Base Assembly, forms the mainframe of the machine.
23. Base Assembly
The Base Assembly provides support to the whole machine. The four casters provide
movement for the machine in any direction. The front casters have a locking function.
Summary of Contents for Datascope AS 3000
Page 2: ...AS Datascope Anesthesia Delivery System Service Manual...
Page 9: ...Table of Contents vi 0070 10 0683 AS3000 Service Manual This page intentionally left blank...
Page 13: ...Introduction Notes x 0070 10 0683 AS3000 Service Manual This page intentionally left blank...
Page 179: ...0070 10 0683 Rev K August 8 2014...
