Mindray BeneView T8, Operation Manual

Page: 202 / 290

Recording
21-4
21.4 Setting up the Recorder
21.4.1 Accessing the Record Setup Menu
By selecting [
Main Menu
]
→
[
Record Setup >>
], you can access the [
Record Setup
] menu.
21.4.2 Selecting Waveforms for Recording
The recorder can record up to 3 waveforms at a time. You can select, in turn, [
Waveform 1
],
[
Waveform 2
] and [
Waveform 3
] in the [
Record Setup
] menu, and then select the
waveforms you want. You can also turn off a waveform recording by selecting [
Off
]. These
settings are intended for realtime and scheduled recordings.
21.4.3 Setting the Realtime Recording Length
After starting a realtime recording, the recording time depends on your monitor’s settings. In
the [
Record Setup
] menu, select [
Length
] and toggle between [
8 s
] and [
Continuous
].
„ [
8 s
]: record 8-second waveforms from the current moment.
„ [
Continuous
]: record the waveforms from the current moment until stopped manually.
21.4.4 Setting the Interval between Timed Recordings
Timed recordings start automatically at preset intervals. Each recording lasts 8 seconds. To
set the interval between timed recordings: in the [
Record Setup
] menu, select [
Interval
] and
then select the appropriate setting.
21.4.5 Changing the Recording Speed
In the [
Record Setup
] menu, select [
Paper Speed
] and toggle between [
25 mm/s
] and [
50
mm/s
]. This setting is for all recordings containing waveforms.