Mindray BeneHeart D2, Operator'S Manual

Page: 111 / 208

Defibrillator/Monitor Operator’s Manual 17 - 1
17
Review
17.1 Reviewing Events
The equipment can automatically record and save patient events.
To review events, press the Main Menu button in the Monitor mode, Manual Defib mode or Pacer mode, and
then select [
Review >> ]
→
[ Review Events >> ].
The following figure shows the [ Review Events ] menu.
In the [ Review Events ] menu, you can:
■ Select [ Event Type ], and then select [ User Initiated ], [ Phys. Alarm ], [ Arrhythmia ], [ NIBP Meas. ], [ Tech.
Alarm ] or [ All ] to review events as desired.
■ Select [ Prev/Next ] to page up/down to view more events.
■ Select [ Index ] to enter the [ Index ] menu. In this menu, you can set the time span in which the events
happened.
■ Select [ Record ] to print out the current event list.
■ Select [ Previous Menu ] to return to the previous menu.
■ Select [ Exit ] to return to the main screen.
Patient events will be saved as archived events when the equipment is turned off. In case of power failure, the
saved patient events will not be cleared or lost; they will be turned into archived events instead.
NOTE
•
Pausing or switching off alarms will not be recorded as events.
•
A total loss of power has no impact on the saved events.
•
Earlier-recorded events might be overwritten by later ones if it reaches capacity.
17.2 Reviewing Tabular Trends
To review tabular trends, choose either of the following ways:
■ In the Monitor, Manual Defib or Pacer mode, press the Main Menu button on the front panel, and then
select [
Review >> ]
→
[ Trends >> ].
■ In the Monitor mode, repeatedly press the [ Trends ] soft key.