Mindray BeneFusion VP5 Operator'S Manual Download Page 29

Page: 29 / 104

3-5

NOTE



Only 2 pumps (syringe pump and infusion pump can be cross

combined) can be carried by the handle set, or the handle of the handle

set might be broken. Please refer to 3.1.4 Multi-channel Pumps

Combination for the combination operation of multi-pump.

3.1.6 Connect the AC Power Source

To connect the pump to the AC power source, follow this procedure:

1. Always use the accompanying power cord delivered with the pump, and check

that both ends of the power cord and surroundings without liquid drug and other

residues.

2. Connect one end of the power cord to the device's AC power supply port, and

check that internal and surrounding AC power supply port without liquid drug and

other residues.

3. Insert the other end of the power cord into the three-plug connector. Check that

the AC indicator light is on.

WARNING



The earthing wire in the three-plug connector should be grounded, if there

is a doubt whether the AC power system is grounded or not, please adopt

the built-in battery and contact an electrical technician at the hospital or

the company.



Do not touch the power plug with wet or moist hands! If there is a liquid

drug or residue on or around the both ends of the power cord, power

socket or plug, device's AC power supply port, the user should completely

clean and dry the area before plugging into the power supply, or accidents

or injuries may result!

Summary of Contents for BeneFusion VP5








































































































Search results

Summary of Contents for BeneFusion VP5

Reviews:

Related manuals for BeneFusion VP5

Brands by name

Popular brands

Mindray BeneFusion VP5, Operator'S Manual

Search results

Summary of Contents for BeneFusion VP5

Reviews:

Related manuals for BeneFusion VP5

Brands by name

Popular brands