Mindray BeneFusion uVP, Instructions For Use Manual

Page: 43 / 62

A - 3
A.2 Wireless Network
A.3 Infusion Specifications
Standards IEEE 802.11a/b/g/n
Modulation mode BPSK, QPSK, 16-QAM, 64-QAM
Operating frequency 2412MHz to 2472MHz
5180MHz to 5320MHz
5500MHz to 5700MHz
5745MHz to 5825MHz
Data rate IEEE 802.11a: 6 to 54 Mbps
IEEE 802.11b: 1 to 11 Mbps
IEEE 802.11g: 6 to 54 Mbps
IEEE 802.11n: MCS0 to MCS7
Transfer power < 20 dBm (CE requirement: detection mode – RMS)
< 30 dBm (FCC requirement: detection mode – PEAK)
Operating mode Transmitting data through the wireless access point
(AP)
Data security Standard: OPEN and WPA/WPA2-PSK
Encryption: TKIP and AES
System capacity
Number of the pumps supported by a single AP:
≤
16
Data transmission delay
between the pump and the
CMS Total data transmission delay time between the pump
and the CMS is
≤
8s
Interruption number and time
between the pump and the
CMS
Total interruption duration
≤
0.01* total
communication time
(Test within 24 hours, with 16 pumps, in which three
pumps are roaming for 30 times)
Delay time of network
disconnection alarm
≤
14 s
Accuracy
Infusion accuracy:
≤
±5%(use SHINVA ANDE single use
infusion set for pump)
Infusion accuracy:
≤
±4.5% (use B. Braun I
ntrafix
Primeline)
Bolus accuracy:
≤
±5% or ±0.02ml, whichever is greater
Drip accuracy:
≤
±10%
Note: Test in accordance with IEC60601-2-24:2012
Infusion accuracy sensor error
≤
±3% (operating at a rate of 100 ml/h)