Mimer X-Link Connection Manual Download Page 1

Page: 1 / 4

Page 1/4

Connect a Jotron TR7750 to Mimer X-Link

Interface Power Supply

+12VDC / max 0,3A.

See wiring diagram on the following page.

Radio setup

The interface is pre-set for the following radio default settings:

•

Rx Config/Audio/Line Output Level/0.0dBm

•

Rx Config/Squelch/RxBusyOutput: Closed when busy (default)

•

Tx Config/Audio/Input Source/Auto

•

Tx Config/Audio/Line Sensitivity/-10dBm

•

Tx Config/Keying/Source/Txgnd

See screen shots on following pages.

The radio is connected through one RJ45 to the Tx: REM port.

Jotron TR7750 A

www.lse.se

REE

Summary of Contents for X-Link

Page 1: ...for the following radio default settings Rx Config Audio Line Output Level 0 0dBm Rx Config Squelch RxBusyOutput Closed when busy default Tx Config Audio Input Source Auto Tx Config Audio Line Sensitivity 10dBm Tx Config Keying Source Txgnd See screen shots on following pages The radio is connected through one RJ45 to the Tx REM port Jotron TR7750 A www lse se REE ...

Page 2: ...with squelch output for Rx detect Part of the Configuration software window Check adjust the audio levels in both directions in the interface so that the users hears the X Link with the same level as when listening to other radios See the X Link setup manual for details on setting the audio level Jotron TR7750 A www lse se REE ...

Page 3: ...Page 3 4 Radio Settings Screen shots Select Mic TxKey and Txgnd Unselect Line Jotron TR7750 A www lse se REE ...

Page 4: ...Page 4 4 Connection Cable Select the proper configuration below depending on if your radio will be connected as Radio A or Radio B to the X Link interface Jotron TR7750 A www lse se REE ...