Page 1/5
Connect a JVC-Kenwood radio with
15 Pin HD connector to Mimer X-Link
NX820 / NX3820 - series
Interface Power Supply
+12VDC / max 0,3A.
Connection
The radio is connected through the back 15PIN connector.
See wiring diagram on the following pages.
Radio programming
GPIO Pin 10 shall be programmed for external PTT active low.
The External PTT (voice) shall be connected to the MI2 line.
Apart from that, no special programming is needed in the radio.
See screen shots on following pages.
Radio Hardware setting
Two jumpers need to be moved from the factory setting in the radio.
See last page for details.
Kenwood 15Pin HD A
www.lse.se
REE