MIMAKI UJF-605RII, Operation Manual

Page: 42 / 170

- 1-20 -
Menu Mode
The printer’s three modes are described below.
< LOCAL > mode
Touch [Roll Print] on the [Menu] screen to display the LOCAL mode for roll print.
Touch [Leaf Print & Head check] to display the LOCAL mode for leaf print on the touch
panel. The LOCAL mode is in preparation for printing.
All operation switches are enabled.
Date reception from a computer is available except for printing.
The following operations are available.
1. Touching the appropriate JOG to set up an origin and the printing area.
2. Touching the [TEST] to start test printing.
3. Touching the [CLEANING] to start head cleaning.
4. Touching the [COPY] to copy the printing data the printer printed.
5. Touching the [FUNCTION] to set printing conditions. ( [FUNCTION] mode)
< FUNCTION > mode
While the printer is in the LOCAL mode, touch the [FUNCTION] to put the printer into the
FUNCTION mode. This is the mode in which printing conditions can be set. Refer to the
chapter 4 “Various setting” or chapter 5 “Maintenance Functions”.
< REMOTE > mode
The printer prints an image from data it receives.
During the printing operation, touch the [REMOTE] to interrupt the printing operation.
While the printer is in the LOCAL mode, touch the [REMOTE] to put the printer into RE-
MOTE mode.
< MEM. > mode
A Printing information (pass number, resolution, color etc.) can be memorized for copying
of multi editions, printing the data which was received.
While the device is in the REMOTE mode, touch the [COPY] to put the device into the
MEMORY mode.