MIMAKI tx300p, Operation Manual, Page: 35 / 130

2-5
2
2
2
5
6
Chapter 2 Basic Operation
Adjusting the Head Height
Set the head gap (height from the media to the nozzle
plane of the heads).
When the carriage is to move above the platen for printing
or maintenance, it moves while keeping the head gap at
the preset value.
The upper limit of the head gap varies with media
thickness.
Available setting values: [2.0 mm to 7.0 mm] (in units of
0.1 mm)
1
Press (MENU) (twice)
key in LOCAL.
• MACHINE SETUP MENU will be displayed.
2
Press to select “HEAD HEIGHT”,
and press the key.
• Move the carriage to the platen.
3
Loosen the height-adjusting screw in front,
and press the
key.
• Loosen the screws, rotating each by one turn of a
standard screwdriver.
4
Adjust the height-adjusting handle
according to the media.
• Rotate

while pressing

.
• Look at the display and adjust to an appropriate
value.
5
Fix the carriage.
• Fasten the screw securely.
6
Press the key.
• The carriage automatically returns to the station.
7
Press the key several times to
end the setting.
Carriage
Height-adjusting handle

