MIMAKI Tx300P-1800B, Operation Manual, Page: 24 / 144

Chapter 1 Before Use
1-10
Connecting the power cable
1
Insert the power cable into an inlet of the
machine.
2
Secure a cable band.
• Secure the cable with the cable band attached to
this machine.
3
Insert the power plug into a plug socket.
Setting Ink
1
Take out the 2L ink pack.
• Take out the 2L ink pack and the IC chip from a
small cardboard box.
2
Mount the IC chip.
3
Put the 2L ink pack into the
2L eco-case.
(1) Open the 2L eco-case as shown on the right.
• Do not use any power cables other than the
attached power cable.
• Be sure to connect the power cable to the outlet
near this machine, and make sure that the power
cable can be easily removed.
• Connect the power cable to the grounded
outlet.Otherwise, it may result in fire or an electric
shock.
Inlet
Power cable
Cable band
Power plug
Socket
• Be careful of the IC chip direction. If it is set in the
wrong direction, ink is not supplied properly.
2L ink pack
IC chip
IC chip
Insert the chip facing the metal
side to the left.
Do not touch the metal part
while inserting. (The IC chip
may be damaged by static
electricity.)
(2) open to right
and left.
(1) While pressing
the finger grip,