MIMAKI TextileJet Tx2-1600 Series, Operation Manual

Page: 133 / 154

- 4.19 -
Check the stretch and shrink of fabric after the printing [STRETCH CHECK]
Check whether the cloth is stretching or shrinking after the printing.
The check pattern will be printed at resolution 360 dpi.
Stretch check method
The printing goes as the following order;
cruciform ---> fill pattern ---> square mark
The stretch condition of the cloth can be verified by the gap between the cruciform and the square
mark.
When the cloth is stretched
The square mark will approach the fill pattern.
When the cloth is shrunk
The square mark will move to the outside.
STEP
1. Put the device into the FUNCTION mode.
(See page 4.3)
FUNCTION
MAINTENANCE
< ENT >
500 mm
C
ruciform
Fill pattern
S
quare mark
Output direction