MIMAKI Textile Jet Tx3-1600, Operation Manual

Page: 30 / 218

- 1.10 -
Names And Functions Of The Parts Under The Front Cover
Under the front cover, there are the carriage, capping station, etc. necessary for printing operation.
The mechanisms provided under the front cover are explained below.
• Keep hands away from the sensor amp switches except service man to
avoid acting it up.
Capping station
The capping station consists of ink caps, wipers for cleaning the heads, etc.
Ink Cap : It covers the nozzles of print head to prevent from drying up.
Wiper : It is used to clean the head nozzles.
Head height adjuster
Flushing box
Flushing box is the filter that absorbing ink mist
and stock it for the waste ink during the printing.
Box is able to wash with water. (Refer to P.3.24)
Carriage and Capping station
ANR unit
(ANR = Automatic Nozzle Recovery)
Peeling sensor amp
Ink cap
Wiper