MIMAKI Textile Jet Tx3-1600, Operation Manual

Page: 112 / 218

- 3.4 -
Replacing and cleaning the water cleaning filter
When the filter is clogged, make sure to replace or clean it. After a certain period of time, the mes-
sage shows as below LCD.
• Release the warning by executing Count Reset: Wash Filter on P.5-20.
1. Open the tank and then loosen the setscrew.
2. Replace the filter with a new one and then,
tighten the setscrew.
3. Insert the hose in the tank without slacks.
4. In case “Replace Filter” messages has given,
the counter resetting should be needed for the
cleaning filter.
Refer to Page 5.20 “Resetting the counters for each type”
Wash Tank
Check The Filter