MIMAKI ML Tiger-1800B MKII, Operation Manual

Page: 13 / 174

Chapter 1 Introduction
1-7
1
2
3
4
5
6
Electrical Equipment
This equipment has been designed and manufactured to carry out specifications and functions agreed with customers.
It is not allowed to use the machine for other uses, as there may be a danger to human life or a failure of this machine or
your product.
Electrical supply
The electrical supply unit will function correctly when it satisfies the conditions of the following electricity supply items.
Repair
In case of trouble or malfunction of this machine, required to notify our company. We will give instructions to our engineers
and provide information needed to solve the trouble for the customers.
General Safety Instructions
The operation of this machine has been carefully and thoroughly analyzed during the preparation of this manual.
Therefore, the indicated number of operators, their qualifications, and the intervention procedures are optimized to ensure
safety and health of them and achievement of their final objective.
If the work contents and work procedures are changed and the number of operators is increased or decreased, there is a
possibility that the safety of the operators themselves may be exposed to serious danger or the desired results may not be
obtained.
• Be careful not to pinch your hands etc. on the top cover of the heater.
• Be careful not to catch your hands at the belt edge cover.
Voltage AC380 V ±10 %
Frequency 50 Hz ±1 % or 60 Hz ±1 %
No. of phases 3-Phase 5-Wire (L1,L2,L3,N,PE)
• Operation of this machine should be performed by a maintenance worker or a trained operator.
• During operation, dangerous voltage is applied to this machine.
• Failure to follow warnings could result in injury to operators.
• Only maintenance workers and operators can perform work on this machine and the periphery of this
machine.
• The operator must understand all the dangerous situations and maintenance procedures described in
this manual.