- 12 -
Cleaning the flushing tray
When sublimation transfer ink 51 (Sb 51) is used, each time when the power is put on, the following messages are
indicated. Perform the cleaning of the ink tray.
Operating procedures
1
Press [
] key.
The carriage moves and goes off the station.
2
Open the maintenance cover and remove the F-BOX
filter and F-BOX filter base.
3
Remove the flushing tray and clean the ink
accumulated in the tray.
4
Fix the flushing tray. Also, fix the F-BOX filter and F-BOX filter base in the same manner.
When the ink is in contact with skin or gets in the eye, immediately wash it out completely with water.
The ink tray of the
Flush. BOX is cleaned
INK TRAY CLEANING
CANCEL <
> EXEC
INK TRAY CLEANING
CANCEL <
> EXEC
Flushing
tray
