5
3
Clean the wiper slider.
• Use a clean stick dipped in maintenance liquid 07 to wipe away
any ink that has adhered to the edges of the wiper slider.
Also clean the slanting part inside the wiper slider, if it is dirty.
Wipe off so that maintenance liquid 07 will not remain.
4
Clean the area around the wiper.
• Dip the clean stick in the maintenance liquid07, and wipe clean the wiper guide upper portions and the por-
tions one level below.
Further, in the cases as explained below, replace the wiper with the new one in accordance with "Replacing
the wiper" on Chapter 4 of the Operation Manual.
When the wiper is deformed
When the stuck ink can not be wiped off
When the warning for wiper replacement is indicated
Procedure2
1
Move the carriage.
• Move the carriage referring to “Cleaning the Wiper and
Cap” Step 1, Chapter 4 of the Operation Manual.
2
Clean the wiper.
• Dip the clean stick into the maintenance liquid 07 and wipe
off the wiper. Wipe off so that maintenance liquid 07 will not
remain.
Wipe
Clean if dirty
Wiper guide upper portions and portions one level below
Wiper guide
Wiper guide
Wiper
Wiper