MIMAKI JV4 Series, Operation Manual

Page: 70 / 152

- 2.2 -
OPERATION
This section describes the operation panel that is used to operate the device and the menus from
which to choose the desired item.
OPERATION PANEL
The operation panel that is used to operate the device and a method of maintenance of the device
after operation, etc.
The operation panel must be used when operating the device.
Therefore, it is indispensable to understand how to use the operation panel.
Display
Displays a set item, a guidance
error, etc.
POWER lamp
It lights up (in green) when the
power to the device is turned on.
[DATA CLEAR] key
Used to erase the data that has
been input to the device.
[REMOTE] key
It is used to change the operation
mode between the REMOTE mode
and the LOCAL mode.
[ENTER] key
Used to input set items, such as
plotting conditions.
JOG keys [ ] [ ] [ ] [ ]
They are used to shift the carriage
and the medium under the LOCAL
mode. In addition they are used to
select a set value.
[TEST] key
Used to start test plotting on the
setting menu.
[FUNCTION] key
Used to set plotting conditions.
[END] key
Used to cancel the last set item that
has been input or to return to the
previous setting menu.
[CLEANING] key
Used to start cleaning of the head.