MIMAKI JV4 Series, Operation Manual

Page: 34 / 152

- 1.16 -
Right side of Waste ink tank.
1. Insert the large waste ink tank to the right side
bracket and raise up.
2. Rotate the waste ink tank assy 90 degrees to
back.
3. Close the bracket and fix with the stop screw.
INSTALLING THE ROLL HOLDERS
1. Change the fixed position of the left-hand roll
holder.
The left-hand roll holder can be fixed at either of two posi-
tions. Determine the fixing position of the left-hand roll holder
according to the thickness of the roll core used, then fix it
with the screw.
2-inch roll core: Use the outer fixing hole.
3-inch roll core: Use the inner fixing hole.
• When the device is shipped from the factory, the
left-hand roll holder is set in the position for 3
inch roll core.
2. Fix the right-hand roll holder with the furnished
screw.
Fix the right-hand roll holder in the position appropriate to the
width of the medium used.
For 3-inchi roll core
For 2-inchi roll core
2000 cc