MIMAKI JV4 Series, Operation Manual

Page: 32 / 152

- 1.14 -
6. Holding both ends of the main unit with four
persons.
Hold up the device at the pedestal support bars.
7. Place the main unit on the stands while exer-
cising care not to allow hands to be caught
between them.
Set the device on the stand at the position where the screw
holes in the device align with the screw holes in the tops of
the stands.
Fix the device to the stands with the screws from under the
stands tops.
• The device is very heavy. Take care that it does
not fall: it is very dangerous.
INSTALL THE TAKE-UP DEVICE
1. Set the take-up device in position.
Align the screw holes in the take-up device with the screw
holes in the outer side of each stand, then fix the take-up
device to the stands with the screws.
There are a number of screw holes for installation of the
take-up device.
Fix the take-up device at the most convenient height.