MIMAKI JV4 Series, Operation Manual

Page: 139 / 152

- 5.5 -
TROUBLES FOR WHICH ERROR MESSAGES ARE GIVEN ON THE LCD
If something is wrong with the device, the buzzer sounds and a corresponding error message is given
on the LCD.
Take an appropriate corrective measure in accordance with the message.
ERRORS ACCOMPANIED BY WARNINGS
These errors arise on the ink-related components.
Warning message Cause Corrective measure
< LOCAL > CARTRIDGE
KCMYcm
KCMYcm
< LOCAL > INKnearEND
KCMYcm
KCMYcm
< LOCAL > INK END
KCMYcm
KCMYcm
<< LOCAL >>
REPLACE WIPER
<< LOCAL >> RUB
REPLACE WIPER
Ink cartridge is not loaded on
the ink station.
The amount of ink remaining in
the ink cartridge is insufficient.
The ink cartridge has run out of
ink.
Time to replace the wiper in the
capping station with a new one
has come.
Attach the ink cartridge(s)
corresponding with the
number(s) shown on the display.
Printing can be continued in file-
by-file basis by pushing the
[REMOTE] key. However, it is
recommended to replace the ink
cartridge of which number is
shown on the LCD with a new
one.
Replace the ink cartridge of
which number is shown on the
LCD with a new one.
Printing will be enabled by
pushing the [REMOTE]. Then,
the error message will not
appear until the power is re-
turned on. It is recommended,
however, to replace the wiper
with a new one as soon as
possible.