MIMAKI JV4 Series, Operation Manual

Page: 112 / 152

- 4.2 -
MAINTENANCE OF THE DEVICE
The term “maintenance” as used herein refers to the operation that has to be performed to keep the
device in good operating condition.
To carry out maintenance of the device, select [MAINTENANCE] from the function menu and make
the necessary settings.
FUNCTION MENU [MAINTENANCE]
The table, below, shows the tree structure of the function menu [MAINTENANCE].
In order to use the application functions of the device, it is necessary to understand the proper
sequence of key operations.
[FUNCTION] See Chapter 2 "HOW TO USE THE BASIC FUNCTION ".
SET UP
[FUNCTION] LIST
MAINTENANCE
DATA DUMP
PRINT adjust PRINT START Adjust Pattern TYPE1 to 7 ADJUST VALUE -15 to 15
STATION CARRIAGEout
WIPER EXCHG
HEAD HEIGH
ARTWORKtest PATTERN : NOZZLE
PATTERN : 100% STD1 to 3 NORMAL1 to 3
FILL UP INK Select Head Loading operation
INK CHANGE Pigcm, PigOG, Dye, Sub
USE HEAD ALL, FRONT, REAR
MEDIAremain SET ON, OFF
REST ADJUST PRINT START PRINTING Input adjustment value
[FUNCTION] See Chapter 3 "HOW TO USE THE APPLICATION FUNCTION ".
DISPLAY